Thursday, March 25, 2010

Cheap-o Kitchen Remodel: The Details

So earlier this week our kitchen was mentioned on Young House Love and it drew all kinds of visitors to this here blog. I've never seen such bloggy traffic! It's exciting for little bloggers like me.

(And if you're new here, welcome!)

And since that YHL post, I've gotten all kinds of kitchen-related questions that I'm going to attempt to answer.

First, here are some kitchen-ish posts you may have missed:

Scenes from when we first moved in: Progress
Painting: Color Splash
Our black table & chairs: DIY Project #1 of 32453
Before/after light fixtures: The Difference a Light Fixture Makes
The curtain over the sink: The Master Seamstress
The in-between stage: Kitchen In Progress
And of course, the final product: The Kitchen

We spent our $400 on an electric sander, a jig saw, cabinet hardware, primer, white paint, oil-rubbed bronze spray paint, liquid nails, "real" nails, and beadboard. We'd already taken care of things like hardwood floors, light fixtures, stools, table & chairs, curtains, etc. prior to starting the cabinet paining process.


0207_5781bl



So... on to the details of "how" we accomplished this.
Step 1: Dismantle the kitchen

My very, very sweet husband did the first few steps all by his lonesome while I was visiting friends in D.C. What a guy! First he emptied all of the cupboards and stashed all of our kitchen crap in the dining room. He then used an electric drill (with a screwdriver bit attached) to take off each of the cupboard doors. And he pulled out all of the drawers. The kitchen definitely looked skeleton-ish.



0116_4951bl



At some point he also took off all the hinges and hardware, putting all of the pieces in a bag for safe keeping.

Step 2: Sand 'er down

Josh spent $20 or so on an electric sander and bought a fairly fine grain of sandpaper to go with it. He sanded down the cupboard "bones," the fronts of the drawers, and both sides of the cabinet doors. As I understand it, this helps to make wooden surfaces more tacky and thus helps the paint stick. Our cabinets, prior to sanding, had a high gloss finish, so it was good to get 'em a little roughed up.

Step 3: Prime Time

I don't know what kind of primer we used, but I'm sure it went something like this:
Josh went to the store, described the project, and bought what was recommended. He primed everything. Bones, inside, outside, up, and down.



0117_4949bl



We'd made the decision to paint inside the cabinets for a couple of reasons. One, they were looking dingy. Two, we knew it'd be hard to stop and make a nice, neat line where the painting stopped. So of course we primed where we planned to paint.

He used one coat of primer.

Step 4: Painting

I actually helped with this part. (Crazy - I know!)

Josh put on coat #1 while I was still gone. He used both a paintbrush (for the tighter spots) and a small roller (for the larger, flat parts). The roller was recommended by the paint store and designed specifically for cabinet painting.

Painting the cabinet bones was easy enough, but painting inside everything was VERY time consuming. Just a warning! Put on a good audio book while you're doing this!

Josh set up a mini paint shop for all of the cabinet doors in our basement, using old paint cans as platforms. I'm pretty sure a large part of The Tudors: Season 1 was watched from the comfort of our unfinished basement room that weekend. To tackle the cupboard doors, he first used the brush to get paint into the grooves. He then used the roller on the other parts. Once side one was dry, he'd flip them over and start again.



0123_5010bl



I helped with coat #2. Josh was fed up with painting inside the cupboards by that point so I tackled that. We ended up doing a "touch up" coat later on as well.

Step 5: Spray paint the hinges



0123_5016bl



This was easy, but in retrospect I'd do a better job of painting them from different angles. As in spray one side. Dry. Flip. Spray other side. Dry. Bend hinge. Spray. Dry. Flip. Spray. Dry. Bend another way. Spray. Dry.

I definitely found a few places where I hadn't done the most complete spray painting job.

Step 6: Put the kitchen back together

Using our drill once again, and our painted hinges, we put the cupboards back together. We also put down some shelf liner paper and put away our kitchen equipment.

It was at this point that we saw some thin places that needed an extra coat of paint. So we spot-checked and rolled more paint on the cupboards where necessary.

Step 7: Install Hardware



0123_5030bl



We didn't spray paint our old stuff here, because we just didn't like the shape. So we spent about $100 at Home Depot buying new cabinet handles and drawer pulls that fit our style. We just made sure the new ones would fit in the old holes.

Step 8: The Beadboard project

Okay, this has it's own step-by-step process, and I'll leave it for a future post. Stay tuned!

Any further questions regarding this part of our project? Ask away!

And because many of you have asked, here's our source list:
Green Paint - Benjamin Moore Mountain Lane
White Paint - Sherwin Williams West Highland White
Light fixture - The Great Indoors (and it wasn't cheap)
Bar Stools - Target (they were pretty cheap)
Kitchen Table - Bought from friends, garage sale style
Kitchen Table black paint - no idea, but we did just walk into a hardware store, describe the project, and bought the paint they recommended - in black.
Curtain - homemade from a West Elm duvet cover
Drawer pulls/cabinet handles - Home Depot
Beadboard - Lowe's

7 comments:

Steph from Michigan said...

Found link to your blog on Young House Love...love it! Great job painting up the kitchen...couple of questions for you not related to the paint project. Love those floors! We're going to put hardwoods down this summer...what brand & type are yours? Also, your kitchen countertop: is it the new high resolution laminate? Keep up the great work!!

Unknown said...

Awesome update with all your kitchen redo details.

Too funny...I have the same Target barstools, but I was convinced yours were from somewhere else because they just seemed to look better in your kitchen.

Thanks for answering my question! I'll keep checking back for more updates on your beautiful home...

Lynn said...

Still amazed by your talent and eye for design. Awesome job!

Kari's Cupcakes said...

I am getting ready to paint my cabinets and I absolutely love yours! Did you use oil based primer? My uncle (painter) says we need to use everything oil based but I am dreading the cleaning....

Thanks so much! I need to take some before pics soon....

Erika said...

I have to ask you...I want to do this to my kitchen which looks strikingly similar to yours!!! Did you ever have any guilt for painting over perfectly good wood? My hubby thinks I'm a bit nuts. ha! But I LOVE it and would start today if he'd let me...
http://erikarenae.blogspot.com/2010/03/i-sooooooooo-want-to-do-this.html

closets Bergen said...

Remodeling a kitchen can indeed be very overwhelming. The experience that you have shared regarding such is truly a great motivation to others. Those who are dealing with this kind of project will surely find this helpful. Thanks for sharing.

John Brocker said...

I am getting ready to paint my cabinets and I absolutely love yours.If you are facing these problems then you should avail our
Affordable Kitchen
Remodeling
services.